3/8" Nozzles

High efficiency, high quality small nozzles designed for 1/8", 1/4" & 3/8" pressure washer and jetting equipment. Small nozzles are typically custom drilled for your specific jetter pump ratings but higher-end nozzles are configured with steel inserts. Over time water will eventually erode the nozzle jets, decreasing the operation efficiency. Nozzles with inserts can be refreshed to like new operation by installing a new set of inserts, increasing the life of the nozzle.
View as List Grid

11 Items

per page
Desc
  1. Reaper Jetter Nozzle
    3/8" Reaper Jetting Nozzle
    $620.00
    1 forward jet at 0° and 4 rear jets at 20°. The Reaper has the best cutting power that we've seen for a water cutting nozzle. The single forward jet creates a 24° cutting cone that has outstanding cutting power, taking half the time that other popular front jet nozzles took in our test on an OSB board. DON'T TAKE OUR WORD FOR IT, here's a video from Hydra-Flex showing the Reaper vs. leading competitors: Reaper Nozzle video 4 rear jets at 20° give the nozzle good pulling power down the pipe and good flushing power as you bring debris back. The 3/8" Reaper comes in 2 sizes based upon the GPM and PSI configuration. The slightly smaller 6.0 nozzle size is ideal for 3" to 6" pipes, while the 9.0 nozzle size is ideal for 4" to 8" pipes. The Reaper is made from stainless steel with tungsten carbide added to wear surfaces for longer life. Configurable from 3.7 - 9 GPM, up to 4,000 PSI. See the specific configuration options below. Learn More
  2. 3/8"  Arzino Jetter Nozzle
    3/8" Arzino Flushing Nozzle
    As low as $99.00
    1 front jet with 3, 4 or 5 rear jets at 15°.  This small, egg-shaped nozzle is a powerful flushing sewer nozzle.  It is well-suited for curved pipe runs and long runs.    The Arzino (Bullet) is constructed of hardened alloy steel or stainless steel for durability and long life.  Available sizes: 1/4", 3/8" 1/2", 3/4" & 1". See specifications at the bottom of the page. Features: • 1 front jet ar 0°+ 1 plug to optionally use the front jet • 8 GPM: 3 rear jets @ 15°; 10 GPM: 4 rear jets @ 15°; 12 GPM: 5 rear jets @ 15° • See detailed specifications below. Applications: • General, all-around sewer cleaning; • Sand, mud and light sediments; • Great for long pipe runs; • Easily navigates pipe bends and elbows. Click Here for Arzino size information, pricing and complete specifications. Click here to watch a video of the Arzino nozzle Learn More
  3. Raut Chisel Point Jetter Nozzle Side View
    3/8" Raut Chisel Point Jetter Nozzle
    As low as $195.00

    Raut Chisel Point Nozzles (Mole) are excellent penetrating nozzles for breaking through pipe obstructions and cleaning out sewer lines. The chisel point nozzle utilizes 3 or 4 powerful front jets and sharp nozzle edges to cut its way through obstructions. 3 or 6 rear jets angled at 20° provide strong thrust to propel the nozzle down the sewer line and into the obstruction.    Available Sizes: 1/8", 1/4", 3/8", 1/2", 3/4" & 1"

     1/8"1/4"3/8"1/2"3/4"1"
     $125$155$185$245$327$348
    Applications:    - Cleaning out grease obstructions;   - Cutting through roots;   - Chiseling through ice blockages;   - Flushing debris out of cleared lines; Jet Configuration:   - 3 or 4 front-facing jets, 3 at 20° 1 at 0° for maximum cutting power;   - 3 or 6 rear-facing jets at 20° providing thrust into obstructions   -Jets are either drilled or configured with inserts (see SPECIFICATIONS below); Learn More
  4. Rhino sewer jetter nozzle side view
    3/8" Isonzo Sewer Cleaning Nozzle
    As low as $209.00
    Excellent jetter nozzle for sewer line cleaning and flushing.   A popular use for the Isonzo (Rhino) is for cleaning sewer pipe walls prior to TV camera inspection.    This rugged, stainless steel nozzle is wear resistant and a great choice in rugged environments such as concrete pipes.  Available sizes: 1/4", 3/8", 1/2", 3/4" & 1". Click here for Isonzo prices & specifications (below) Applications: • Degrease pipe walls; • Sewer line cleaning prior to camera inspection; • Flushing debris out of cleaned lines. Jet Configuration: • Forward - 1 @ 0° • Rear - 6 at 30° Learn More
  5. Tremol Spinning Nozzle
    3/8" Tremol Spinner Jetter Nozzle
    As low as $189.00

    The Tremol Spinning Jetter Nozzle (Ferret) is an outstanding sewer cleaning nozzle.     This rotating nozzle with spinning water jets at 90° angles to the pipe wall is perfect for all-around cleaning action.

    The Tremol is an excellent jetting nozzle for:
       - removing grease or soap;
       - descale limestone;
       - flushing pipes prior to camera inspection;
    Jet Configuration:
    - 4 jets at 90° to the pipe for pipe wall cleaning
    - 4 rear-facing jets at 20° for pulling & flushing (except 1/2" connector)
    - The 1/2" connector has 6 rear-facing jets at 25°

    Centralizer rings can be used for keeping the spinning nozzle centered in the pipe.
    Click here for Tremol Sewer Nozzle Specifications.

    Click here for video of Tremol Spinner Nozzle Learn More

  6. Essential sewer jetter nozzles kit
    3/8" Essential Sewer Nozzles Kit
    As low as $599.00
    Four top selling, high performance 3/8" jetter nozzles bundled together into 1 kit to provide a convenient and cost effective solution.     Save $150 if both individually! The Essential Sewer Nozzles Kit contains nozzles for the 4 most common sewer cleaning applications:     •  The Isonzo (Rhino) for general sewer cleaning;
        •  The Arzino (Bullet) for flushing debris out of the pipe or drain;
        •  The Tremol (Ferret) spinning nozzle to degrease or descale pipe walls;
        •  The Raut (Mole) penetrating nozzle to chisel through sewer line obstructions; A great basic tool kit to clean, unclog, degrease, descale and/or flush any sewer line situation you may encounter. Also available: 1/2", 3/4" & 1" Kits. Learn More
  7. Round Hex Head Jetter Nozzle
    3/8" Round Hex Head Flushing Nozzle
    $64.00
    6 rear jets configured at 20° angle provide powerful pulling power down the line and excellent flushing power for pulling back debris.  This small nozzle's Hex head allows for easy wrench tightening to your jetter hose. The only one of our small nozzles featuring jets drilled at 20° for pulling power. Configuration: • Jets: 6 rear jets at 20° • GPM: 2 - 20 • PSI: Up to 4,000 • Sizes: 1/8", 1/4", 3/8" & 1/2" Click here for Round Hex Head nozzle specifications This nozzle is custom drilled to your pump's GPM and PSI ratings.
    Please allow 1 - 2 business days for drilling and shipping. Learn More
  8. Monster Jetter Nozzle
    3/8" Monster Dual Angle Jetter Nozzle
    $64.00
    Configured with 1 front jet at 0° + 6 rear jets (3 at 25° & 3 at 45°). The Monster is an excellent small nozzle for pulling hose down the line and flushing as you pull it back. Our most popular of all small nozzles, the Monster's small size and round nose allows it to navigate around extremely tight corners and P traps. Configuration: • Jets: 1 forward at 0°, 6 rear jets: 3 at 25° & 3 at 45° • GPM: 2 - 20 • PSI: Up to 4,000 • Sizes: 1/8", 1/4", 3/8" & 1/2" Click here for Monster nozzle specifications This nozzle is custom drilled to your pump's GPM and PSI ratings.
    Please allow 1 - 2 business days for drilling and shipping. Learn More
  9. Penetrator Jetter Nozzle
    3/8" Penetrator Jetter Nozzle
    $66.00
    3 front jets at 10° + 6 rear jets at 45°, The nozzle's 45° nose angle assists it in penetrating obstructions. 3 forward jets provide excellent cutting power and 6 rear jets provide both pulling power and line flushing.   One of our most popular small nozzles, it is an excellent nozzle for de-greasing or de-icing pipes. Configuration: • Jets - 3 forward @ 10°, 6 rear @ 45° • Size: 3/8" • Flow Rate: 4 - 20 GPM • Pressure: up to 4,000 PSI Click here for Penetrator nozzle specifications This nozzle is custom drilled to your pump's GPM and PSI ratings.
    Please allow 1 - 2 business days for drilling and shipping. Learn More
  10. Rotor Jet Spinning Nozzle
    3/8" Rotor Jet Nozzle
    $189.00
    2 side jets at 90° + 2 rear jets at 45°, The spinning Rotor Jet nozzle gives you excellent pipe wall cleaning power and line flushing/pulling power.   One of our most popular small nozzles, the Rotor Jet is an excellent nozzle to degrease or descale the sides of pipes.  Also vailable in: 1/4", 3/8", 1/2", 3/4" & 1". Configuration: • Jets - 2 sideways @ 90° + 2 rear @ 45° • Hose Sizes: 1/8", 1/4", 3/8", 1/2", 3/4" & 1" • Flow Rate: 2 - 50 GPM • Pressure: up to 4,000 PSI Click here for Rotor Jet nozzle specifications This nozzle is custom drilled to your pump's GPM and PSI ratings. Please note, CUSTOM DRILLED NOZZLES CANNOT BE RETURNED. Please allow 1 - 2 business days for drilling and shipping. Learn More
  11. 3/8" Root Rat Nozzle Kit
    3/8" Root Rat Nozzles Kit
    $795.00
    3/8" hose connection, 3-12 GPM, 2,000-7,500 PSI. The 3/8" Root Rat nozzles kit is very versatile and can be configured to operate with jetter pumps operating between 3 - 12 GPM and 2,000-7,500 PSI. The nozzles are hardened stainless steel for long life. The kit comes with 2 rotating heads:    - 1 Steel cable head with extra cable for custom sizes    - 1 Roller chain or Flail chain head, w/ extra chain for custom sizes    - Parts and wrenches for quick changes    - case Optional nozzle centralizer / skid available with extra cable, see below Click for video of Root Rat Flail Chain cutting concrete block Learn More
View as List Grid

11 Items

per page
Desc